Gear reducers have the characteristics of providing low speed and high torque output. In some products that require high torque output, when the direct output torque of the micro motor is not enough, a gear reducer will be needed to change the output torque.
The reduction ratio of WPWDT200,WPWDT250,WPWKT40,WPWKT50,WPWKT60 the gear reduction DC motor is fixed after leaving the factory. In practical applications, it still needs to work at different speeds. For micro DC motors, only the voltage needs to be adjusted. The gear reduction structure is composed of gears, shafts, and boxes. In order to ensure the performance of the micro reduction motor, the box should have sufficient stiffness and heat dissipation.
The gear reducer achieves low speed and high torque through the principle of a small gear driving a large gear. The number of teeth of the small gear and the large gear is the transmission ratio. In addition to reducing the speed and increasing the torque, the micro gear reduction motor also has the following characteristics: 1. Change the output shaft direction. The normal micro motor output shaft direction cannot be changed.
After being combined with the gear reducer, the output shaft direction can be changed according to the needs. Up, down, left, right, front and rear can be designed; 2. The gear reducer has high overload capacity, and some large reducers can reach hundreds of kilowatts; 3. The micro gear reducer motor has high efficiency, up to about 95% ; 4. Low noise, no vibration, long service life. In addition to the above, gear reducers can be matched with various types of micromotors to combine mechatronics, such as micro DC motors, brushed motors, brushless motors, coreless motors, etc.
