The reduction motor refers to the integration of the reducer and the motor (motor). This integration can also be called gear motor or gear motor. Generally, professional reducer manufacturers provide complete sets of reducer and motor after integrated assembly.
1) Reduce the speed and increase the output torque at the same time. The torque output ratio shall be based on the motor output multiplying/decelerating ratio, but it shall not exceed the rated torque of the reducer.
2) Speed reduction reduces the inertia of the load at the same time, which is the square of the reduction ratio. You can see that general motors have an inertia value.
Purpose of reducer
1. Accelerating and decelerating is commonly referred to as transmission gearbox
2. Change the transmission direction. For example, we can use two sector gears to vertically transmit the force to another rotating shaft
3. Change the rotating torque. Under the same power condition, the faster the gear rotates, the smaller the torque the shaft receives, and vice versa
4. Clutch function: we can separate the engine from the load by separating two originally engaged gears, such as the brake clutch
5. Distribute power For example, we can use one engine to drive multiple slave shafts through the main shaft of the gearbox, thus realizing the function of one engine driving multiple loads.
As an important accessory of the motor, the planetary reducer has good data in all aspects. Generally, the customer should ask for the data clearly when asking, and there should also be professional technicians when installing. Otherwise, incorrect data or poor installation will lead to mechanical problems in the later stage and affect the later work, which will not pay off.
WPDS200,WPDS250,WPKS40,WPKS50,WPKS60
