The reducer is actually a power transmission mechanism, which does not generate power. Its function is to reduce the rotation number of the motor (motor) to the desired rotation number by using different gear sizes and speed converters, and obtain a larger torque. Isn't it enough to adjust the speed of the motor? In fact, the motor is directly connected to the equipment. When the equipment is running, the load on the motor is very large, which will cause great damage to the motor. However, it is not the same when passing through the reducer. For example, the reducer with a reduction ratio of 100 has only one percent of the load on the motor when the machine is running. In addition, if the reducer is broken, it only needs to replace the lower gear, and the cost is much lower than that of the motor.
Reducer is a kind of relatively precise machinery. The purpose of using it is to reduce the speed and increase the torque. It has many kinds, different models and different uses. According to the transmission type, it can be divided into gear reducer, worm gear reducer and planetary gear reducer; According to the different transmission stages, it can be divided into single-stage and multi-stage reducers.
Among the mechanisms used to transmit power and motion, the reducer is widely used. Its applications range from large power transmission to small load and accurate angle transmission. In industrial applications, the reducer has the function of reducing speed and increasing torque.
The main functions of the reducer are as follows: 1. Reduce the speed and increase the output torque at the same time. The torque output ratio is the motor output multiplied by the reduction ratio. However, it should be noted that the rated torque of the reducer cannot be exceeded. 2. Deceleration also reduces the inertia of the load.
WPWEDK80-135,WPWEDK100-155,WPWEDK120-175,WPWEDK135-200,WPWEDK155-250
