1. The cochlear shaft cannot be used as the input shaft.
2. The supporting motor (i.e. power) cannot exceed the value specified in the sign.
3. If the user wants to change the shaft feed direction, take the second end cover of the lower shaft, take out the worm shaft, and adjust 180. You are ready to load. Do not knock hard when loading, to slowly push the two shafts meshing.
When the worm gear reducer is installed, it must be firmly installed on the machine and cannot be loosened. During this process, it is necessary to confirm that the reducer is in the correct direction before intermittent installation. If the reducer can not be placed for a long time, more than 3 to 6 months, and the oil seal is not immersed in the lubricating oil, it is recommended that the reducer user replace the oil seal. According to the reducer specification, the standard operating environment temperature is -5 degrees to 10 degrees. If this rating is exceeded, please contact the manufacturer. Decelerators are usually used in conjunction with deceleration motors or electric motors, so ventilation devices need to be installed to improve heat dissipation and maintain normal operation. After installation and use, the lubricating oil level must be checked first, rather than immediately lift the load. Suggestions gradually increase. It is recommended to install protective devices around the worm gear reducer.
