When the WPEX155-250,WPEDX40-70,WPEDX50-80,WPEDX60-100,WPEDX70-120 planetary reducer is working, it will consume fuel. The longer it works, the greater the fuel consumption will be. However, the quality of the oil will directly affect the working efficiency of the planetary reducer. Therefore, the quality of the oil will also have an important impact on the equipment. So, how should we check the oil quality?
When checking the planetary reducer, we must first cut off the power supply. After the reducer becomes cold, we can check it. Place an oil pan under the oil drain bolt. , then open the oil level bolt, oil drain bolt and breather to start draining the oil. Wait for all the oil to drain out, then reinstall the oil drain bolt and inject new lubricating oil. 2. The lubricating oil of the planetary reducer may deteriorate due to long use, so the oil quality in the planetary reducer must be checked regularly. 3. When selecting lubricating oil, be sure to pay attention to the brand and model of the lubricating oil. The brand and model of the lubricating oil must be consistent with that of the planetary reducer. The oil amount is consistent with the installation position. After observing the oil level bolt to reach the specified amount, tighten the oil level bolt and breather. 4. For planetary reducers, how often should the oil be changed? How often should the oil be changed? These issues are also related to the model of the planetary reducer. Generally, when buying a reducer, there will be instructions in the manual, but when we put If the machine has been used for a long time, we will make our own judgments about oil changes and maintenance at this time.
Let's take the oil change of planetary reducer as an example: when the reducer has been running for 200-300 hours, the oil should be changed once. In future use, the quality of the oil should be checked regularly, and oil mixed with impurities or deteriorated must be replaced in time. Under normal circumstances, for reducers that have been working continuously for a long time, new oil should be replaced after 5,000 hours of operation or once a year. For reducers that have been out of service for a long time, new oil should also be replaced before re-operation. The above content is organized by Ruixin Electrical and Mechanical. I hope it will be helpful to everyone. Ruixin Electromechanical is a professional reducer manufacturer that develops and produces high-quality Creba planetary reducers, servo reducers, gear reducers, precision planetary reducers, servo planetary reducers and other products to meet customer needs.
