Which aspects will cause gear wear of the reducer？
Element analysis:
① Lack of oil;
② If the lubricating oil is mixed with metal chips under wear, the tooth surface will also be worn;
③ The gear material does not meet the requirements, causing abnormal wear;
④ The gear has defects such as sand hole, air hole, looseness and spheroidization;
⑤ The hardness of heat treatment cannot be or is not subject to heat treatment;
⑥ Gear meshing accuracy and motion accuracy can not meet the requirements;
⑦ Arc gear is very sensitive to the fault of base distance, especially the positive fault of base distance, which not only reduces the bending strength of gear teeth, but also increases the sliding wear.
Treatment method: the hardness of the forward gear surface, reduce the surface roughness value, adhere to the cleanliness of the transmission equipment and lubricating oil, ensure adequate lubrication, participate in appropriate anti-wear additives in the lubricating oil, add several magnetic bodies in the oil tank, and use the magnetic effect to absorb the metal particles in the lubricating fluid, which can reduce the content of metal particles in the lubricating fluid.
WPEDKS70-120,WPEDKS80-135,WPEDKS100-155,WPEDKS120-175,WPEDKS135-200
