WPA40 reducer working conditions
1, reducer smooth transmission, vibration, impact and noise are small, reduction ratio is large, can be used with all kinds of mechanical equipment.
2, can be single stage transmission to obtain larger transmission ratio, compact structure, most models of reducer has better self-locking, brake requirements of mechanical equipment can save the brake device
3, worm gear reducer worm screw tooth and worm gear tooth surface mesh friction loss is large, so the transmission efficiency is lower than the gear, easy to heat and high temperature.
4. Higher requirements for lubrication and cooling.
5, good compatibility, worm gear and worm are manufactured according to the best, bearings, oil seals, etc.
6, the box type has the basic type (the box is vertical or horizontal with the sole board two kinds of structure) and ** type (the box is rectangular, with a fixed screw hole on many sides, without the sole board or another installed sole board and other kinds of structure)
7, the output and input axis position direction of the input axis under and above; Output shaft up and down; Input axis up and down.
Working conditions of reducer:
1, reducer when the working environment temperature is -40℃-+40℃, when the working environment temperature is below 0℃, lubricating oil must be heated to above 0℃ before starting, when the reducer working environment temperature is higher than 40℃, cooling measures must be taken.
2, worm gear reducer into the shaft can be positive and negative rotation.
